iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3

Posted by Will on Wednesday, February 27th, 2008 at 2:12 pm under Announcements, Apple, Applications, Developer, Mac OS, iPhone

iPhone v1.1.3 jailbreak method from iPhone Dev Team
[Update 4]
ZiPhone 2.0 is now ready to make put all your jailbreaking woes to rest. ZiPhone 2.0 is available for Windows and Mac machines and is basically a GUI (graphical user interface) that uses the iPhone Dev Teams’ jailbreak solution to automate the iPhone v1.1.4 jailbreak process to point-and-click simplicity. Download ZiPhone 2.4 here.

This guide has been updated to reflect the new, easier process.

[Update 3]
Added a tip for jailbreaking iPhone v1.1.1 with jailbreakme.com.

[Update 2]
Jailbreakme.com has been updated. You no longer have to install Oktoprep prior to updating your jailbroken iPhone v1.1.1 to a jailbroken v1.1.2 firmware.

[Updated]
The final steps of this jailbreak guide have been appended with a simpler and less involved method. A new third-party application is available through Installer.app (AppSnapp). Namely, the new iJailbreakMobile application makes updating to v1.1.3 jailbreak a breeze.

With the release of iJailbreakMobile, this guide is better used as a “downgrade” guide for anyone that wishes to update their baseband or has already updated to v1.1.3. Jailbroken iPhone with v1.1.1 or v1.1.2 firmware can ignore most of these steps.


Okay, if you’re reading this, chances are that you’ve been scouring the web for some straight-up answers on how to upgrade your iPhone to the jailbroken v1.1.3 firmware. For the uninitiated, a “jailbroken/jailbreaked” firmware simply means that the particular firmware version is capable of installing and running unofficial third-party applications. The new iPhone v1.1.3 firmware is most likely the firmware that Apple will use to distribute their official iPhone SDK-based third-party application, and so jailbreaking the v1.1.3 firmware offers the best of both worlds - official and unofficial third-party native iPhone applications.

Let’s get down to the nitty gritty. This guide will walk you through the iPhone v1.1.3 jailbreak process, and should work regardless of your current firmware version. This tutorial uses the iPhone Dev Team’s v1.1.3 jailbreak method, not Nate True’s leaked solution:

The following is the updated instruction set:

  • Download the iPhone v1.1.3 firmware package to your desktop.
    Download it here.
  • Download the ZiPhone 2.4 iPhone v1.1.3 jailbreak package. (Choose the Mac or Windows version, you should know which one you need)
    Download it here. (Make it easy, put it on your Desktop)
  • Make sure you backup your data. (Just sync your iPhone with iTunes)
  • Connect your iPhone to your computer and let iTunes start up.
  • Goto the iPhone pane in iTunes and hit the “update” button.
    At this time, the iPhone v1.1.4 firmware is available through iTunes, so iTunes will likely want to upgrade your iPhone to v1.1.4 - DO NOT LET THIS HAPPEN.

    • If you iTunes wants to update your iPhone to v1.1.4, press “Cancel.”
    • Force your iPhone to restore itself to v1.1.3 by holding down the “Option” key while click “Restore” (Mac) or holding down the “Shift” key as you click “Restore.”
    • Choose the iPhone v1.1.3 firmware package that you downloaded to your desktop.
  • Quit iTunes.
  • Fire up ZiPhone.
  • Check the appropriate boxes and jailbreak/unlock/activate your iPhone v1.1.3.
  • Enjoy! (Props to the iPhone Dev Team and Zibri!)

Keep reading if you feel like checking out the older iPhone v1.1.3 jailbreak process.

  • Make sure you backup your data. You will be “restoring” your iPhone several times.
  • You need a WiFi connection which your iPhone and computer both share (they need to be on the same network).
  • Your iPhone needs 300MB of free space.
  • Even iPhones previously jailbroken using Nate True’s method can be re-jailbroken with this more stable method.
  • AT&T, O2 UK, T-Mobile Germany, Orange France customers can update their baseband to take advantage of iPhone v1.1.3’s new features. To do this, simply update your iPhone to v1.1.3 via iTunes. Unlocked customers will want to avoid this step.
  • Proceed slowly and carefully, some steps take time and you just need to be patient.

Here’s what you’ll need before we start (put everything on your desktop):

Mac users -

Windows users -

Starting with a factory/non-jailbroken iPhone v1.1.1

(in which we’ll discuss how to downgrade your v1.1.2 or v1.1.3 iPhone to the non-jailbroken v1.1.1 starting point). Jailbroken iPhones using v1.1.1 or v1.1.2 firmwares will want to skip this step:

  1. Download the Apple iPhone v1.1.1 firmware here. Place it on your desktop
  2. Connect your iPhone to iTunes
  3. Place your iPhone in DFU restore mode by holding down the “Home” and “Power” buttons simultaneously. You’ll see the “Slide to turn off” button, keep holding those buttons
  4. Wait until the screen goes black and release only the “Power” button - keep pressing the “Home” button. iTunes will recognize that the iPhone is in restore mode - the screen should be black. If you see the “Connect to iTunes” image, restart at Step 3 until you enter DFU restore mode. Again, if you do this correctly, you’ll have a completely blacked-out screen while iTunes recognizes your iPhone in restore mode
  5. Restore your iPhone to v1.1.1 firmware by holding down the “Option” key and clicking the “Restore” button (Mac OS X), or holding down the “Shift” key while clicking the “Restore” button (Windows)
  6. Navigate and choose the iPhone v1.1.1 firmware file on your desktop (iPhone1,1_1.1.1_3A109a_Restore.ipsw)
  7. If you immediately get an error “(1)” you need to make sure you enter DFU restore mode - go back to Step 3
  8. Let iTunes do its thing, you will get an error (1015) or (1013), that’s okay, it’s supposed to happen
  9. Apply the iPhone v1.1.1 firmware again to ensure that the firmware “took”
  10. At the error (1015) or (1013) prompt, you’ll notice that your iPhone is in restore mode and iTunes doesn’t want anything to do with it. Quit iTunes.
  11. At this point, fire up iNdependence (Mac) or iBrickr (Windows) and wait a tick for it to pull your iPhone out of restore mode (it takes 30 seconds to a minute)
  12. You should now be staring at a “Activate iPhone” screen. Quit iNdependence or iBrickr

Jailbreak your iPhone v1.1.1 firmware

Non-jailbroken (factory fresh iPhones) with v1.1.1 firmware start here:

  1. Slide the “Slide for Emergency” slider.
  2. Dial “*#307#” without quotes, obviously.
  3. Hit “Call”
  4. Delete the numbers and dial “0″
  5. Hit “Call”
  6. Hit “Answer”
  7. Hit “Hold”
  8. Hit “Decline”
  9. Choose the “Contacts” tab and add a new contact by hitting the “+” button in the upper right corner
  10. Hit “Add new URL”
  11. Add “prefs:” and save
  12. Hit “Add new URL” again
  13. Add “http://jailbreakme.com” and save
  14. Save the contact as “Z” or whatever you feel like naming it
  15. Hit the “prefs:” URL
  16. Navigate to “General” > “Auto-lock” and choose “Never“
  17. Connect to your WiFi network, enter password if required
  18. Press the “Home” button and you’ll be back at the “Activate iPhone” screen
  19. Slide that “Slide for Emergency” slider again
  20. Dial “0″
  21. Hit “Answer”
  22. Hit “Hold”
  23. Hit “Decline”
  24. Choose your newly added contact
  25. Hit the “http://jailbreakme.com” URL. This will open up Safari
  26. Scroll down to “Install AppSnapp” and hit it
  27. Safari will close, you’ll be taken back to the “Activate iPhone” screen, wait until your iPhone reboots. If you are still staring at the “Activate iPhone” screen after 5 minutes, go back to Step 19. (TIP: as you wait for jailbreakme.com to finish the jailbreak, keep playing with the activation screen slider - keep sliding it halfway to keep the iPhone from turning off before jailbreakme.com has a chance to reboot the device)
  28. iPhone will reboot to a freshly jailbroken v1.1.1 firmware with Installer.app/AppSnapp installed. You did good.

[Update] Here are the revised instructions. iJailbreakMobile makes upgrading your jailbroken v1.1.1 iPhone a simple, one-click process.

You can ignore the rest of the instructions after this section. iJailbreakMobile only requires that you have a jailbroken iPhone v1.1.1. If you followed the instructions in the previous section, you should have a jailbroken iPhone v1.1.1.

If you wish to upgrade to jailbroken iPhone v1.1.2 firmware before running iJailbreakMobile, skip this section and follow the instruction in the next section.

  1. Fire up Installer.app (AppSnapp).
  2. Make sure you have “BSD Subsystem” installed. If not, do so now.
  3. Add http://ijailbreak.com/repo.plist to your “Source” list. If you don’t know how, check out our tutorial
  4. Refresh your “Source”
  5. You should now see a new application category called “iJailbreak”
  6. Within the “iJailbreak” category, choose the iJailbreakMobile v1.1.1 installer
  7. Hit the “Home” button to return to your homescreen
  8. Find the new icon “iJailbreak” and run it
  9. Wait for at least 45 minutes before you do anything. The iJailbreakMobile application has to download the entire 160MB iPhone v1.1.3 firmware from Apple, decompress it, patch your iPhone, and do other jailbreaking magic, so this process can take a while.
  10. Your device will reboot once iJailbreak is done doing its thing. You should have a jailbroken iPhone v1.1.3 at this point. If not, just go back and try uninstalling/reinstalling iJailbreak and running it again.
  11. That’s it! The instructions below pertain to the older jailbreak method that required a good amount of terminal-command work, and can be a little intimidating. If you like a challenge, use the below instructions in place of iJailbreak.

Preparing your jailbroken iPhone v1.1.1 for upgrade/update to jailbroken iPhone v1.1.2

If you’d rather update your iPhone to a jailbroken v1.1.2 firmware before running iJailbreakMobile, then follow the instructions in this step.

Jailbroken iPhones with v1.1.1 firmware start here:

  1. Fire up “Installer.app” (aka AppSnapp)
  2. Update the “Installer.app” application
  3. Navigate to “Tweaks 1.1.1″
  4. Download and install the “Oktoprep” package (Update: Ensure that it’s installed)
  5. Navigate to “General” > “Auto-lock” and choose “Never“
  6. Open up iTunes
  7. Update (DO NOT Restore)your iPhone by holding down “Option” while clicking “UPDATE” (Mac), or hold down “Shift” while clicking “UPDATE” (Windows) - DO NOT RESTORE
  8. Navigate to and choose the iPhone v1.1.2 firmware (iPhone1,1_1.1.2_3B48b_Restore.ipsw)
  9. When iTunes is done updating to v1.1.2, you will be stuck in restore mode (if not, then continue). If you are stuck in restore mode, fire up iNdependence (Mac) or iBrickr (Windows) to pull your iPhone out of restore mode (as we did previously)
  10. You will be returned to the “Emergency Call” screen - the logo is different, don’t worry
  11. Quit iNdependence or iBrickr
  12. Quit iTunes
  13. Remember that “1.1.2-jailbreak” package you downloaded to your desktop? Yea, open that up and double-click “jailbreak.jar” (Mac) or “windows.bat” (Windows)
  14. After a couple minutes, the java application will finish up and hopefully reboot your iPhone. If you get to the completion dialog box and your iPhone is not rebooting (wait a bit before you take action, this stuff takes time), fire up iNdependence (Mac) or iBrickr (Windows) to return to the homescreen
  15. Your iPhone will probably reboot again, let it
  16. Once rebooted, you will have a jailbroken iPhone v1.1.2

[Update] Here are the revised instructions. iJailbreakMobile makes upgrading your jailbroken v1.1.2 iPhone a simple, one-click process.

If you’ve decided to upgrade to jailbroken iPhone v1.1.2 firmware, then the instructions in this section are all you need to update your iPhone to a jailbroken v1.1.3 firmware. If you’d rather do things manually (through terminal commands) then skip this step.

  1. Fire up Installer.app (AppSnapp).
  2. Make sure you have “BSD Subsystem” installed. If not, do so now.
  3. Add http://ijailbreak.com/repo.plist to your “Source” list. If you don’t know how, check out our tutorial
  4. Refresh your “Source”
  5. You should now see a new application category called “iJailbreak”
  6. Within the “iJailbreak” category, choose the iJailbreakMobile v1.1.2 installer
  7. Hit the “Home” button to return to your homescreen
  8. Find the new icon “iJailbreak” and run it
  9. Wait for at least 45 minutes before you do anything. The iJailbreakMobile application has to download the entire 160MB iPhone v1.1.3 firmware from Apple, decompress it, patch your iPhone, and do other jailbreaking magic, so this process can take a while.
  10. Your device will reboot once iJailbreak is done doing its thing. You should have a jailbroken iPhone v1.1.3 at this point. If not, just go back and try uninstalling/reinstalling iJailbreak and running it again.
  11. That’s it! The instructions below pertain to the older jailbreak method that required a good amount of terminal-command work, and can be a little intimidating. If you like a challenge, use the below instructions in place of iJailbreak.

Upgrade your jailbroken iPhone v1.1.2 to jailbroken iPhone v1.1.3 (this step is no longer necessary, iJailbreak does all this for you)

iPhones with jailbroken v1.1.2 firmware start here:

  1. Connect to your WiFi network, if it isn’t already connected
  2. Navigate to “Settings”>”WiFi” and click the little blue arrow next to your WiFi connection
  3. Write down (or memorize, it ain’t hard) your iPhone’s IP adress
  4. Fire up “Installer.app” and download/install “BSD Subsystem files” and “OpenSSH”
  5. Make sure your “Installer.app” application is updated to the latest version (v3.0b10)
  6. Navigate to “General” > “Auto-lock” and choose “Never“
  7. Update to v1.1.3 firmware
    • Mac
      • Get to a Mac computer connected to the same network as your iPhone
      • Start “Terminal” (Applications>Utilities>Terminal)
      • Type the command:
        “scp -r ~/Desktop/Jailbreak-1.1.3/* root@<iPhone IP ADDRESS>:/” where <iPhone IP ADDRESS> is the IP Address of your iPhone. “Jailbreak-1.1.3″ is the folder that contains the 1.1.3-jailbreak package (the one you downloaded to your desktop).
      • Hit Enter
      • Type “yes” and hit enter
      • At the password prompt, type in “alpine” (your keystrokes will seem to go unregistered - that’s okay, just type the password)
      • Hit Enter and wait at least a minute before fiddling with anything
        If you hit an error that looks like “@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @”, run the command “rm ~/.ssh/known_hosts” and go back to the “scp” command
      • Type the command: “ssh root@<iPhone IP ADDRESS>”
      • Hit Enter
      • Type “cd /”
      • Hit Enter
      • Type “sh install.sh”
    • Windows
      • Get to a Windows computer connected to the same network as your iPhone
      • Start the command window by hitting the
        Start Menu then Run and typing in “cmd”
      • Type “cd desktop”
      • Type the command:
        “scp -r ~/Jailbreak-1.1.3/* root@<iPhone IP ADDRESS>:/” where <iPhone IP ADDRESS> is the IP Address of your iPhone. “Jailbreak-1.1.3″ is the folder that contains the 1.1.3-jailbreak package (the one you downloaded to your desktop).
      • Hit Enter
      • Type “yes” and hit enter
      • At the password prompt, type in “alpine” (your keystrokes will seem to go unregistered - that’s okay, just type the password)
      • Hit Enter and wait at least a minute before fiddling with anything
        If you hit an error that looks like “@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @”, run the command “rm ~/.ssh/known_hosts” and go back to the “scp” command
      • Type the command: “ssh root@<iPhone IP ADDRESS>”
      • Hit Enter
      • Type “cd /”
      • Hit Enter
      • Type “sh install.sh”
  8. Wait at least 15-20 minutes before you start getting antsy, this step takes some time - go watch some TV or something
  9. Or, watch the command window it downloads the v1.1.3 firmware from Apple, decompress it, upload it, patch it
  10. Once done, the command window will terminate your SSH connection and reboot the iPhone
  11. Close the terminal window
  12. Restart the command window and SSH to your iPhone
    • Type:
      “ssh root@<IPADDRESS>” (Mac)
      “putty -ssh root@<IPADDRESS>” (Windows)
    • Hit Enter
    • Type “cd /Applications”
    • Hit Enter
    • Type “chmod +s Installer.app/Installer”
    • Hit Enter
    • Type “chown -R root:wheel Installer.app”
    • Hit Enter
  13. Close the command window
  14. That’s it!
  15. Well, actually, if you want phone-functionality, you’ll want to keep reading

Restore phone functionality to your iPhone (this step is no longer necessary, iJailbreak does all this for you)

  1. Fire up “Installer.app” and ensure that “BSD Subsystem” and “OpenSSH” are installed
  2. Connect to your WiFi network, if it isn’t already connected
  3. Navigate to “Settings”>”WiFi” and click the little blue arrow next to your WiFi connection
  4. Write down (or memorize, it ain’t hard) your iPhone’s IP adress
  5. On Mac
    • Get to a Mac computer connected to the same network as your iPhone
    • Start “Terminal” (Applications>Utilities>Terminal)
    • Type the command “chmod +x ~/Desktop/lockdownd”
    • Hit Enter
    • Type “scp ~/Desktop/lockdownd root@<IPADDRESS>:/usr/libexec” where <iPhone IP ADDRESS> is the IP Address of your iPhone
    • Hit Enter and wait at least a minute before fiddling with anything
      If you hit an error that looks like “@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @”, run the command “rm ~/.ssh/known_hosts” and go back to the “scp” step
  6. On Windows
    • Get to a Windows computer connected to the same network as your iPhone
    • Start the command window by hitting the
      Start Menu then Run and typing in “cmd”
    • Type the command “chmod +x ~/Desktop/lockdownd”
    • Hit Enter
    • Type “scp ~/Desktop/lockdownd root@<IPADDRESS>:/usr/libexec” where <iPhone IP ADDRESS> is the IP Address of your iPhone
    • Hit Enter and wait at least a minute before fiddling with anything
      If you hit an error that looks like “@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @”, run the command “rm ~/.ssh/known_hosts” and go back to Step 8
  7. Hold down the “Power” button and slide the red slider to turn off the iPhone.
  8. Turn it back on
  9. Enjoy your jailbroken iPhone v1.1.3 in all its wiggly-homescreen-icon-Google Maps-My-Location-Installer.app glory!

Related Mobile News:

  • iPhone v1.1.2 already jailbroken - simple, touch-free jailbreak solution for iPhone v1.1.2 [UPDATED]
  • HOT: iPhone v1.1.3 jailbreak released! Update your iPhones to v1.1.3 [updated]
  • Downgrade your iPhone v1.1.3 to v1.1.1
  • Installer.app v3.0 beta released - iPhone v1.1.1 third-party application installer
  • Jailbreakme.com updated to make iPhone v1.1.1 jailbreak simpler, one-click solution

    • 84 Responses to “iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3”

    • Ray Zed Blog » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 … says:
      January 29th, 2008 at 12:16 pm

      [...] benwilson: [...]

    • Iphone » Blog Archive » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 … says:
      January 29th, 2008 at 1:02 pm

      [...] willpark wrote an interesting post today on iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 …Here’s a quick excerptOk, if you’re reading this, chances are that you’ve been scouring the web for some straight-up answers on how to upgrade your iPhone to the jailbroken v1.1.3 firmware. For the uninitiated, a “jailbroken/jailbreaked” firmware simply … [...]

    • iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 … | Uncategorized | Information about the iPhone says:
      January 29th, 2008 at 1:02 pm

      [...] benwilson wrote an interesting post today onHere’s a quick excerptOk, if you’re reading this, chances are that you’ve been scouring the web for some straight-up answers on how to upgrade your iPhone to the jailbroken v1.1.3 firmware. For the uninitiated, a “jailbroken/jailbreaked” firmware simply … [...]

    • Apple » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3 says:
      January 29th, 2008 at 1:03 pm

      [...] IntoMobile - Mobile Phone News and Reviews wrote an interesting post today on iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3Here’s a quick excerpt Ok, if you’re reading this, chances are that you’ve been scouring the web for some straight-up answers on how to upgrade your iPhone to the jailbroken v1.1.3 firmware. For the uninitiated, a “jailbroken/jailbreaked” firmware simply means that the particular firmware version is capable of installing and running unofficial third-party applications. The new iPhone v1.1.3 firmware is most likely the firmware that Apple will use to distribute their official iPhone SDK-based third-party application, [...]

    • Iphone » Blog Archive » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3 says:
      January 29th, 2008 at 1:05 pm

      [...] IntoMobile - Mobile Phone News and Reviews wrote an interesting post today on iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3Here’s a quick excerpt [Updated] The final steps of this jailbreak guide have been appended with a simpler and less involved method. A new third-party application is available through Installer.app (AppSnapp). Namely, the new iJailbreakMobile application makes updating to v1.1.3 jailbreak a breeze. With the release of iJailbreakMobile, this guide is better used as a “downgrade” guide for anyone that wishes to update their baseband or has already updated to v1.1.3. Jailbroken iPhone with v1.1.1 or v1.1.2 firmware [...]

    • Iphone » Blog Archive » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to… says:
      January 29th, 2008 at 1:08 pm

      [...] Palm OS Software, News, Reviews and Accessories - PalmInfocenter wrote an interesting post today on iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to…Here’s a quick excerptOk, if you’re reading this, chances are that you’ve been scouring the web for some straight-up answers on how to upgrade your iPhone to the [...]

    • Iphone info » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 … - IntoMobile says:
      January 29th, 2008 at 1:51 pm

      [...] IntoMobile [...]

    • Free iPod Touch says:
      January 29th, 2008 at 10:36 pm

      Finally someone puts it in one place for everyone, thanks :)

    • jason says:
      January 29th, 2008 at 11:09 pm

      you forgot to mention that you have to install BSD subsystem before you can install the ijailbreak application

    • Is your iPhone v1.1.3 SMS text message out of order? Apple's got a potential fix says:
      January 30th, 2008 at 1:15 pm

      [...] you haven’t already done so, you may want to consider updating your iPhone to a jailbroken v1.1.3 firmware. Whether you’re already rocking the new iPhone v1.1.3, or you are still playing with v1.1.1 [...]

    • chris says:
      January 30th, 2008 at 4:17 pm

      The process went through fine until the end. When ijailbreak was done installing and rebooted, the phone went into recovery mode itunes told me i need to restore it. Anyone else have this problem?

    • ee says:
      January 30th, 2008 at 8:41 pm

      where are the set of instructions Gor starting from a regular v1.1.3 firmware? You make the claim to be providing this yet none of the instructions say they’ll do this.

    • Will Park says:
      January 31st, 2008 at 3:00 pm

      Try using iNdependence to pull it out of restore mode. Just fire it up and wait a minute.

      Good luck!

    • Will Park says:
      January 31st, 2008 at 3:11 pm

      ee:

      If you want to start with a v1.1.3 iPhone, start at the beginning of this tutorial. iPhone’s running the v1.1.3 firmware will need to downgrade their devices before they can jailbreak.

      The very first step is intended for those iPhone users that need to “Downgrade” their device.

    • r0dskee says:
      February 1st, 2008 at 8:58 am

      the thing i dont get with this is ive tried and tried with 4 different guides when i get to the activation screen it says incorrect sim is that right? when i do the #306# it says please wait and then when i dial 0 it says called failed.!! this is the only problem ive had with anyones method and its making me insane can someone please give me some help

    • r0dskee says:
      February 1st, 2008 at 8:58 am

      running the “stock” 1.1.3 btw

    • Will Park says:
      February 1st, 2008 at 1:53 pm

      I assume you are running in to problems after downgrading to v1.1.1

      As soon as you restart your iPhone v1.1.1, you will be looking at the activation screen/emergency call screen.

      Dial *#307# NOT #306# - you have to insert a “*” in front of the first “#”
      Hit Call
      Delete the numbers and dial “0″ (zero)
      Hit Call
      Hit Answer
      Hit Hold
      Hit Decline
      Choose Contacts

      You should be able to bypass activation with this method. Make sure you are doing everything to the “T” as it were.

    • Jailbreakme.com updated to make iPhone v1.1.1 jailbreak simpler, one-click solution says:
      February 1st, 2008 at 2:40 pm

      [...] that the iPhone v1.1.3 jailbreak method is online and greatly simplified (thanks to the iJailbreakMobile application available on Installer.app), we’re willing to bet that many iPhone v1.1.3 owners [...]

    • iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3 | Txtin says:
      February 1st, 2008 at 3:34 pm

      [...] Original post by IntoMobile - Mobile Phone News and Reviews [...]

    • r0dskee says:
      February 1st, 2008 at 6:02 pm

      will: thank you so much man i was going insane after trying this about 30 times i figured out (well you did actually) on my laptop screen i couldnt see the asterisk also when i did prefs i didnt see the colon…anyway thanks again i see the light u r0ck dude =D

    • r0dskee says:
      February 1st, 2008 at 6:27 pm

      will one more question if you’re around i got through the entire thing but i wait the 5 minutes and the phone does not reboot and after a forced reboot i get the initial activation screen as if starting from square one…any thoughts?

    • Will Park says:
      February 1st, 2008 at 8:29 pm

      So after you successfully go and start up jailbreakme.com, the iPhone does not reboot?

      If you are stuck back at the emergency dialer, here’s a little tip (I’ll append the guide to reflect this as well):
      While Jailbreakme.com is doing it’s thing, you’ll be returned to the locked homescreen - keep fiddling with the slider to prevent the iPhone from turning off.

      I ran into this problem where my iPhone v1.1.1 would not reboot correctly after running jailbreakme.com. I prevented my iPhone from turning off by sliding the slider halfway across the slider-bar (is that enough “slider” for ya?).

      Also, make sure you have installed the v1.1.1 firmware with “3A109a” in the filename. Hope this helps.

    • Robert says:
      February 1st, 2008 at 9:48 pm

      THX MAN U SAVE MY ASS.

      THX LOVE U

    • Will Park says:
      February 1st, 2008 at 10:02 pm

      No problemo, that’s what we do here :wink:

    • Free iPod Touch says:
      February 1st, 2008 at 10:15 pm

      Thanks for the final updates.

    • Lasse says:
      February 2nd, 2008 at 7:30 am

      When I add your repository to my sources list it jsut ends up in the uncatagorized section, and nothing is added under install, I have tried refreshing sources and checking for typos a hundred times?

    • Lasse says:
      February 2nd, 2008 at 7:32 am

      Also, where can you get the installer v3.0b10 ? I can’t seem to figure out how to upgrade to that version from basic v 3.0?

    • Will Park says:
      February 2nd, 2008 at 7:11 pm

      iJailbreakMobile shows up as its own category. Look for iJailbreak under the “Categories” section.

      You can update your Insaller.app to 3b10 by “updating” your Installer.app. Hit the “update” tab and it should automatically detect the new version.

    • bigmike says:
      February 2nd, 2008 at 10:49 pm

      I have had a jail-broken Iphone for months now. Everything was flawless. I went to the installer app, and saw the 1.1.3 official upgrader. From the description i saw it said for already jail-broken 1.1.2 phone. Like a NOOB i clicked to install. The upgrade app was on the springboard. I opened the app, everything ran its course and it asked me to reconnect to itunes and when I did it says this: There is a problem with your iPhone

      We’re sorry, the iPhone you connected may be damaged and cannot be activated for service. We recommend you visit your nearest Apple Store for me information.

      WTF. Is there anything i can do(other than the obvious). Any help with this matter would be greatly appreciated.

    • bigmike says:
      February 2nd, 2008 at 11:08 pm

      I am a NOOB. I just restored it

    • Dom says:
      February 3rd, 2008 at 2:09 am

      Hey dont worry about it ,you can get out of it easy ,power it off then hold the power and home button untill you see the apple ,upon seing the apple release power button until it gets to dfu open itune ,shift click restore (make sure you have th ipsw files to downgrade it ,im sure you do ,downgrade it to 1.1.1 go throught the 1015 error ,reboot rejailbreak ,if you have 0049 emei let me know ill tell you what to do

    • Dom says:
      February 3rd, 2008 at 2:11 am

      I had unix command at one point running on my iphone up and down for half an hour and i restored it ,be positive .cheers dom

    • justin says:
      February 3rd, 2008 at 1:08 pm

      after upgrading my unlocked iphone to 1.1.2 then to 1.1.3 programs in the installer keep comming up failed. i would imagine that some are not compatible with the new firmware, my question is, am i right or did something go wrong.

    • Will Park says:
      February 4th, 2008 at 12:19 pm

      Some games still need to be updated to work with iPhone v1.1.3 firmware. I think the problem is that the v1.1.3 firmware runs applications as user “mobile” rather than older firmware’s “root”.

      Just be patient. Many apps do work, but there are a good number that don’t. They’ll be updated soon.

    • Dom says:
      February 4th, 2008 at 10:46 pm

      Hey guys,

      Looks good, seriously you guys are doing the world a favor. Hope people are donating.
      Question- I have a 1.1.1 jailbroken phone and have tried to update to 1.1.2 and it just keeps failing.. anyway finally found your way. I have just downloaded the ijailbreak program and opened it and its on a terminal screen. Is that normal? do I wait the 45 minutes on this terminal screen?

      Might be something else others ask also. Just a little concerned i shouldn’t type ‘run’ or something into it. One last question. I assume that a non ATnT sim will work in it after i update to jailbroken 1.3? Im in Australia so its kinda important as you can imagine.

    • Dom says:
      February 4th, 2008 at 10:58 pm

      PS- it is a blank terminal screen. It just states ‘Last login: blah lah on ttyp0

      Not exactly doing anything

    • Tyler says:
      February 5th, 2008 at 9:40 pm

      So i just jail broke it for the third time ….
      What happend:
      all goes smoothly until iJailbreak. I run it wait 45 min it resets and then when it comes on again its bricked… I connect it to iBrickr and it is red for … 2 seconds and then goes green…

      any clue on how to fix this???>>>…

    • Mark says:
      February 6th, 2008 at 12:40 am

      Uh, everything works fine except I cant use the phone part… Im not even unlocking I am an att customer but it says no service after doing the ijailbreak method

    • Nick says:
      February 6th, 2008 at 11:01 am

      I ran through this on an OOTB 1.1.2 AT&T not jail broken. I upgraded to 1.1.3 as stated in the document then I downgraded to 1.1.1 and at the main screen I had the sim error. I went through and jail broke it. All went OK then I ran the 1.1.1 to 1.1.3 ijailbreakme file then ran the ijailbreak from the home screen it went through and everything looked OK phone rebooted and it went to recovery mode. Tried to use iBrickr to reboot it and it came up green had to restore in iTunes to 1.1.3 and now I’m back to working but obviously not jail broken, what did I miss?

    • Will Park says:
      February 6th, 2008 at 11:35 am

      Hey guys, if the ijailbreak method is giving you problems, I would suggest that you use the older jailbreak method. Simply skip the italicized instruction set.

      The older method takes a bit of command terminal work, but it’s a sure thing. Make sure to download all the “things you’ll need before you begin” packages before you begin.

    • Mark says:
      February 6th, 2008 at 3:30 pm

      the ijailbreak method isnt giving me any problems at all, my iphone is a fully jailbroken 1.1.3 ipod touch, the only problem is the phone is the best part. I completely restored my iphone and started over and did Ijailbreak again and once again it worked completely except for the phone working, and I am an att customer no unlocking is involved. Should I try the second half of the old jailbreak process? It says not neccessary because of Ijailbreak but when i run ijailbreak it doesnt do it will it mess with my phone if i do it again?

    • nikedunk says:
      February 6th, 2008 at 7:25 pm

      Just for the record im a noob. Im running a v1.1.3 firmware and was just wondering if this method posted will work on that version thanks in advance.

    • Mark says:
      February 6th, 2008 at 8:35 pm

      Yes it will just start at the first step, where you download the 1.1.1 firmware then continue from there (you will need to downgrade to 1.1.1 then jailbreak then you will be able to upgrade and jailbreak the next two versions)

      But I cant say for certain if the phone part will work cause mine isnt :(.

    • nikedunk says:
      February 6th, 2008 at 9:14 pm

      is there a for sure method that will jailbreak 1.1.3 and have the phone working? Anything with a 100% success rate?

    • Will Park says:
      February 7th, 2008 at 11:30 am

      Mark, have you tried the older jailbreak method? I can confirm that the older jailbreak method will restore phone-function to the iPhone. I can’t say for certain whether it is safe to use the “restore phone function” step after performing the ijailbreak.

      To be safe, I would say just use the terminal-command based jailbreak method.

      AGAIN. if ijailbreak is giving you problems, go through the tutorial and ignore the italicized directions.

    • Picked up a 16GB iPhone did you? Jailbreak it already! says:
      February 7th, 2008 at 1:11 pm

      [...] Find the instructions here. [...]

    • falanke says:
      February 7th, 2008 at 8:42 pm

      I tried the “iJailbreakMobile from my jailbroken v1.1.1 iPhone” process. Everything worked fine until the iPhone rebooted at the end. My iPhone got bricked.

      What happened? Anyone can help? What should I do next?

    • popajim says:
      February 8th, 2008 at 6:41 pm

      falanke, i had the same exact problem. i tried getting it out of restore mode. i couldnt. i tried ibrickr .91 and i also tried jailbreak 1.1.2 boot from recovery. neither worked. i am still stumped on why it did not work. i also did the ijailbreakmobile from my 1.1.1 firmware. i have been trying for over 2 weeks. what version of baseband are you working with?

    • Tyler says:
      February 8th, 2008 at 7:36 pm

      So ijailbreak worked with the v1.2 sept the phone feature. Im trying to get cmd to run command

      “chmod +x ~/Desktop/lockdownd” Dont know why this wont work but it wont locate the lockdownd file… any answers?

    • Deuce says:
      February 10th, 2008 at 10:49 am

      I’ve got a phone that was 1.1.2 out of the box and I updated to 1.1.3 when I activated it because I didn’t know any better. Does this method work on phones that were 1.1.2 from the get-go?

    • Robert says:
      February 11th, 2008 at 2:45 am

      I have a problem and I desperately need help with it.

      I got a new iPhone with an intergrated 1.1.2 firmware. I sent it to someone to jailbreak and give it phone functionality. He used an X-sim. However, without knowing any better i upgraded to 1.1.3 and i lost all access to my phone. I managed to restore to 1.1.1, jailbreak it, upgrade to 1.1.2 and jailbreak it as well. Everything works now but now I can’t call people or send sms cause the phone doesn’t recognize the sim even with iWorld installed. Also, my baseband is stuck at 04.03.13_G. I’ve tried downgrading it with baseband downgrader but it always crashes.

      Can anyone help me? Does iJailbreak help with this? I dont want to use iJailbreak just yet cause i heard that there are some issues with it. Thanks a lot.

    • NiceGuyJSK says:
      February 13th, 2008 at 11:55 am

      Hi guys,

      I have a jailbroken/unlocked 1.1.1 (3A109a) iPhone working with T-Mobile in the US atm and am really wanting to upgrade to the 1.1.3 firmware. So far, this is the most comprehensive and coherent guide I could find to upgrade but my question is whether or not it’s possible to do on my iPhone without losing phone functionality with T-mobile.

      Thanks in advance for your help!

    • Jason says:
      February 13th, 2008 at 5:32 pm

      Hello everyone! I’m very excited I found this website through countless hours of searching the internet to find a way to download/upgrade/jailbreak etc my phone to get all the cool 3rd party apps everyone has been talking about. I just need to know if the process Will describes at the beginning is for my iphone version 1.1.3. I’ve had it a few weeks now and all the v1.1.1/v1.1.2/v1.1.3 is confusing the hell out of me. I’m assuming the “v” infront of all the 1.1.1, 1.1.2. 1.1.3 stands for version. Is this correct? I guess my question is will this “iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3″
      process work for my iphone version 1.1.3 that I bought a few weeks ago? I’m pretty confident I’m on the right website for getting apps etc but would like some reassurance that it will work for my phone. I would greatly appreciate a reply tonight if possible so I can start working on my phone.
      Thanks so much for your help in advance!

    • Will Park says:
      February 13th, 2008 at 6:13 pm

      Jason:
      If you recently purchased your iPhone, you have to downgrade your iPhone to v1.1.1 as this guide states in the first step.

      NiceGuyJSK:
      Which unlock method did you use? I don’t want to say outright that you will be okay, but if you follow the jailbreak update procedure, you’re unlock should be restore/update resistant.

      Robert:
      This guide is only for jailbreaking your phone. In order to restore phone functionality with a non-official SIM card, you will need to unlock it. Check out this post - http://www.intomobile.com/2008/02/07/unlock-your-iphone-v113-to-work-with-any-sim-card.html

      Deuce:
      This method should work with OTB v1.1.2 iPhones. You will need to downgrade the firmware beforehand.

      Tyler:
      Did you place the lockdownd file on your desktop?

      falanke:
      Try restoring your iPhone. Does iBrickr or Independence recognize the iPhone at all? My condolences, as with all iPhone hacking methods, there is an inherent risk of bricking your iPhone. I’m sorry that this happened to you.

      Hey guys, sorry for the delay in responses. I’m in Barcelona right now for Mobile World Congress/3GSM.

    • NiceGuyJSK says:
      February 13th, 2008 at 6:54 pm

      Hey Will,

      Thanks for the quick response! I believe I used anySIM 1.1 to unlock my iPhone when I got it a few months back but I can’t remember for 100% certainty. Is there a particular unlock method that would brick my iPhone, had I used it? Thanks again for the help!

    • Jason says:
      February 13th, 2008 at 8:50 pm

      Will:
      So your saying I need to start at the “Starting with a factory/non-jailbroken iPhone v1.1.1″ Stage and work my way down the page until I end up at iJailbreakMobile, Correct? If that’s correct I’ve been right the whole time just wanted to be sure. The last thing I wanted to do was brick my phone useless.
      Thanks for the heads up!!

    • Jason says:
      February 13th, 2008 at 10:15 pm

      Will someone please help me I keep getting stuck at the prefs part. I hit the prefs url but it tells me safari can’t be connected and it wont let me navigate to generals > Auto lock to choose never. My phone keeps getting stuck right there and then I have to start over from the beggining. Please Help!!

    • Jason says:
      February 13th, 2008 at 10:43 pm

      Will,
      how do you navigate to generals to never auto lock my phone. I can’t seem to get past this part and I’ve tried 10 times now and everytime my safari wont connect. Can you please help tonight I need this phone for work tomorrow.
      Thanks

    • Jason says:
      February 13th, 2008 at 11:03 pm

      Will,
      Nevermind I figured it out. I couldn’t see the : colon after prefs.

    • Jason says:
      February 14th, 2008 at 12:19 am

      Will,
      I’m in the Categories section and scrolled down to iJailbreakmobile, hit that and then hit iJailbreakmobile 1.1.1 and hit install at the top right and it keeps telling me “error you must install BSD Subsystems package first. How do I do this?
      I’m sorry for all the messages. If you can help ASAP I would greatly appreciate it.
      Thanks!!!

    • Jason says:
      February 14th, 2008 at 1:17 am

      Will,
      I finally got everything downloaded on my iphone. Thank you for that but now I can’t make a phone call or receive a call. Why is that? It’s important I figure this out by tomorrow morning for work.
      Please help ASAP.

    • Robert says:
      February 14th, 2008 at 6:06 am

      Will, my phone has bootloader 4.6. Is there a way that enables me to restore phone phone functionality without downgrading it? If there is none, how do I downgrade the bootloder?

    • Jason says:
      February 14th, 2008 at 10:25 am

      Robert I think you and I are having the same problem! Did you go through the whole process and when the phone rebooted after installing ijailbreak 1.1.1 to upgrade 1.1.3 it asked you to restore to your original iphone seetings and now you can’t make any calls? Everything seems fine but i can’t call anyone or receive calls. I also can’t use my voicemail section hence the not being able to send/receive calls. WILL if you could please help Robert and I we would greatly appreciate it I need my phone for work and I’m nake without it right now. My boss is going to kill me if I can’t send/receive calls. If there’s a way to restore to original seetings and restore my phone back so it will work I need to know. I desperately need help!!! :sad:

    • Jason says:
      February 14th, 2008 at 2:08 pm

      Will:
      Could you please help me out? I’ll pay you if I have to but I need to figure out why my phone won’t send or receive calls. I also can’t use my vocemail feature on my iphone. I followed all the instructions in your jailbreak v1.1.1 and the ijailbreakmobile to upgrade my v1.1.1 to 1.1.3 and now my phone is basically a fancy Ipod. My service carrier is ATT and at the top left all it says is no service. How do I fix my iphone so I can make calls and have it working properly like before I jailbroke it. I beg of you or anyone who reads this I need serious help. I’ve been able to make up a story for my boss that a cell tower in my area is down and i can’t use my phone but he wont believe much longer. I’ll pay a generous amount to anyone who can help me fix my phone to send/receive calls like it was before I jailbroke it.

    • Will Park says:
      February 14th, 2008 at 7:15 pm

      If you are running into problems and need an emergency fix, I suggest a FULL RESTORE of the iPhone. iTunes will require a “Restore and Update” to v1.1.3, but if you really need the iPhone functional, then that’s your best bet. You can always downgrade and retry the jailbreak.

      Keep in mind, if you run into problems with the iJailbreakMobile method, try the manual method. It’s more involved and requires some Terminal work, but it makes a provision to get phone functionality up and running once v1.1.3 is jailbroken. To use the manual method, simply ignore the sections pertaining to iJailbreak - IGNORE THE ITALICIZED SECTIONS

    • Jason says:
      February 14th, 2008 at 9:17 pm

      Will,
      Thank you.
      I tried to restore to my factory settings but I got an error saying ” The iphone “untitled playlist” could not be restored. An unknown error occured (1602).
      What can I do now?

    • mark g says:
      February 16th, 2008 at 11:53 am

      will,
      at the start of “Jailbreak your iPhone v1.1.1 firmware”
      my screen shows
      “Incorrect SIM
      insert an unlocked and valid SIM card to activate iphone”
      could not complete step #16 “Navigate to “General” > “Auto-lock” and choose “Never”

      any help would be great
      thx,mark

    • mark g says:
      February 16th, 2008 at 12:31 pm

      will,
      tried to do a full restore to 1.1.3 to start over.
      no go. iphone screen says “Incorrect SIM
      insert an unlocked and valid SIM card to activate iphone”
      itunes says sim card is not installed or pin locked
      any ideas??
      thx,mark

    • Alberto says:
      February 17th, 2008 at 8:23 am

      [Keep in mind, if you run into problems with the iJailbreakMobile method, try the manual method.]

      My phone is bricked after I run iJailbreakMobile so I wanted to try the manual method… well, after I downgrade to 1.1.1 and jailbreak (all works great), I cannot “Navigate to Tweaks 1.1.1″… I don’t have it listed among the apps on the Installer App.
      So what do I do?

    • Jason says:
      February 17th, 2008 at 3:27 pm

      Hello Everyone this is for people having trouble unlucking and jailbreaking your iphone. I know I’m not the original poster of this blog but I found a method on You Tube to jailbreak and unlock any version iphone with any BL. The newest jailbreak method is from Zibri and it’s called Ziphone 2.3. This method took me less then 10 minutes to do and is the fucking shit. I was trying to find a easy way like all of you are doing and I tried the ijailbreak.com but I couldn’t get phone functionality. If your interested in the link for You Tube fro Ziphone instant message me on Yahoo messenger. My ID is jiggity78@yahoo.com. I’m telling you with this new Ziphone jailbreak all you need to do is connect your iphone and make sure you have the updated restored version of 1.1.3 open Ziphone click a few things and start. THAT”S ALL!!! You’ll have a jailbroken phone in less then 10 mins.
      Best of luck!!!!

    • Alberto says:
      February 17th, 2008 at 3:29 pm

      Actually…. iJailBreak 0.5.2 not 0.5.2 worked like a charm in less than a minute!!!!

    • Jason says:
      February 17th, 2008 at 3:43 pm

      But don’t you have to downlaod all kinds of stuff in order to finally get ijailbreak to work. I mean you have to downgrade to 1.1.1 then enter URL prefs: and ijailbreak.com before you can run ijailbreak 0.5.2?

    • Alberto says:
      February 17th, 2008 at 4:32 pm

      No, I had a freshly restored 1.1.3 16GB iPhone and it worked perfectly.

    • thatspharrell says:
      February 20th, 2008 at 3:22 am

      the opening iNdependence to make my phone go in to regular mode part is not working

    • mason says:
      February 25th, 2008 at 1:34 am

      when ever i press free my iphone on ibrickr my iphone gets a yellow triangle then the backgound turns blue, then a hole bunch of worlds and letters scroll down the screen. what do i do?

    • Zhenya says:
      February 26th, 2008 at 1:38 am

      I have an ipod touch running firmware 1.1.3

      I tried to jailbreak the ipod using ZiphoneWin-2.4. while doing so the screan of my ipod wen all black with white writing going down the ipod. sort of like coding.

      I am unable to resolve the problem and could anyone please help me or tell me what to do.

      Any help appreciated.

      Thanks
      Zhenya

    • Iphone » Blog Archive » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3 says:
      February 27th, 2008 at 2:43 pm

      [...] IntoMobile - Mobile Phone News and Reviews wrote an interesting post today on iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3Here’s a quick excerpt [Update 4] ZiPhone 2.0 is now ready to make put all your jailbreaking woes to rest. ZiPhone 2.0 is available for Windows and Mac machines and is basically a GUI (graphical user interface) that uses the iPhone Dev Teams’ jailbreak solution to automate the iPhone v1.1.4 jailbreak process to point-and-click simplicity. Download ZiPhone 2.4 here. This guide has been updated to reflect the new, easier process. [Update 3] Added a tip for jailbreaking iPhone v1.1.1 with jailbreakme.com. [Update [...]

    • iphone dood? - iPhone Forum - alles over de apple iPhone (in Nederland) says:
      February 28th, 2008 at 4:15 am

      [...] 1.1.1 kom? Hoe kan ik een clean install doen van een firmware? ik doe het via de volgende guide: iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3 dus *#307# bellen etc. .. naar jailbreakme.com etc .. Heeft iemand andere [...]

    • Iphone » Blog Archive » iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to says:
      March 2nd, 2008 at 12:51 pm

      [...] Sizlopedia - Technology, Blogging, Web 2.0 wrote an interesting post today on iPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 toHere’s a quick excerpt…bookmark this on del.icio.us - posted by cruzrincon to iphone tutorial jailbreaking and saved by people… [...]

    • patch 2.4 downloads says:
      March 26th, 2008 at 6:02 am

      [...] download spy++ source spy++ source code spy++ tutorial spy++ vbfree-xxx-tokyo-porn-wl.blogspot.comiPhone v1.1.3 Jailbreak Guide - update from v1.1.1/v1.1.2/v1.1.3 to jailbroken v1.1.3 Update 4 ZiPhone 2.0 is now ready to make put all your jailbreaking woes to rest. ZiPhone 2.0 is [...]

    • Ace26 says:
      May 13th, 2008 at 8:53 am

      Hi, i just used ijailbreak to upgrade my 1.1.1 to 1.1.3 and after all the downloads and patching the phone rebooted and now its stuck on the screen that tells me to connect to itunes. what should my next step be?

      please help!!!!

    • Will Park says:
      May 14th, 2008 at 7:56 pm

      Put your iPhone into DFU restore mode by holding down the power and home buttons. Restore the iPhone through iTunes and go with the v1.1.4 firmware.

      Jailbreak using ZiPhone 3.0.

    • Ace26 says:
      May 14th, 2008 at 11:52 pm

      Thanks will park, i stayed up dat nite, researched just dat.

      thank alot for the feedback

    • Jeeza says:
      May 21st, 2008 at 3:54 am

      Hi I have a jail broken iphone and need to know if I can just power off remove the sim card use it in another phone and then if I put it back in the iphone will it still work?

      Thanks in advance

    Leave a Reply